Painless Trail Rocker, Instructions Manual

Page: 55 / 62

51
Step 64: Notice that the 6-gauge red cable does not have an eyelet on
one end. This is so you can cut the cable to the length you need
for your specific application. Mark the length you need to route
the cable to the positive terminal. Cut and strip the wire about
½” .
Step 65: Once the cable is stripped, remove it from the Fuse/Relay
Center in order to crimp on the included ring terminal from your
parts kit. To remove the cable lift up the fuse cover on the
Fuse/Relay Center bracket. Then, remove the
2 nuts and 200-
amp MIDI fuse holding the cable in place.