Painless Track Rocker series, Installation Instructions Manual

Page: 5 / 24

1
CONTENTS OF THE PAINLESS KIT
Refer to the Contents Figure (below) to take inventory. See that you have
everything you’re intended to have in this kit. If you find that anything is missing or
damaged, please contact the dealer where you obtained the kit or Painless Performance
at (800) 423-9696.
The Painless Track Rocker Kit should contain the following:
 4, 6, or 8-Switch Customizable Track Rocker Switch Panel.

Parts Kits

This manual: 90638
SMALL PARTS
Painless harnesses include parts kits that contain the terminals, fuses, screws, and
nuts necessary for a professional installation. Many of the terminals are non-insulated
and will require heat shrink to be applied after the terminal has been properly crimped.
Waterproof heat shrink has been supplied. These non-insulated terminals allow you to
make clean, weatherproof connections that look like a factory installed wiring system.
When crimping these terminals, take special notice of the split in each terminal. Make
sure the smooth side of the jaw on the crimper goes towards this split.