10
Step 12: After routing the Switch Panel Wires to the Fuse/Relay
Center’s Switch Control Wires, cut the Switch Panel Wires and
loom (if used) to length. Secure the end of the loom with a zip-tie
(provided) or a large piece of heat-shrink (not provided).
Step 13: Strip each of the Switch Panel Wires
3
∕
16
”
, and install a female
pin terminal from the parts kit onto the end of each wire. See
page 3
for detailed instructions on how to properly crimp these
terminals. We recommend
Painless #70900 Roll-Over Crimpers
.
Summary of Contents for Track Rocker series
Page 2: ......
Page 22: ...18...
Page 24: ...Painless Performance Products LLC 2501 Ludelle Street Fort Worth TX 76105 Phone 817 244 6212...
