52
Step 66: These
ring terminals
can be difficult to crimp. It can be done
with a chisel and hammer or with a crimping tool like the one
below. These crimping tools can be found at your local parts
store or online. Once the terminal is crimped, secure it with
about
1”
of
heat shrink
.
Step 67: Next, re-install the cable and
200-amp MIDI fuse
to the
Fuse/Relay Center and connect it to the positive battery
terminal. Then, route the ground wire coming from the
Fuse/Relay Center to the negative battery terminal.
Summary of Contents for 57002
Page 2: ......
Page 9: ...5 Step 3 After you remove the connector unlock the red tab by using a flathead screwdriver...
Page 24: ...20 Now move to Step 25 on page 21 for the Switch Panel installation...
Page 62: ...Painless Performance Products LLC 2501 Ludelle Street Fort Worth TX 76105 Phone 817 244 6212...
