33
TCC PWM Solenoid undercurrent error
Current measured on the torque converter clutch pressure solenoid was too low,
indicating that the solenoid circuit may be open. The controller will attempt to disable both
TCC solenoids until the ignition is turned off.
TCC Solenoid undercurrent error
Current measured on the torque converter clutch pressure solenoid was too low,
indicating that the solenoid circuit may be open. The controller will attempt to disable the
TCC solenoid until the ignition is turned off.
EPC (PCS) Solenoid undercurrent error
Current measured on the line pressure control solenoid was too low, indicating that the
solenoid circuit may be open.
Shift Solenoid A (SSA) circuit shorted
The indicated Shift Solenoid’s resistance measured too low during the power-on solenoid
check. Refer to the data display screen in the diagnostic menu to see the measured
solenoid resistance.
Shift Solenoid B (SSB) circuit shorted
The indicated Shift Sol
enoid’s resistance measured too low during the power-on solenoid
check. Refer to the data display screen in the diagnostic menu to see the measured
solenoid resistance.
3-2 D/S Solenoid circuit shorted
3-2 downshift solenoid resistance measured too low during the power-on solenoid check.
Refer to the data display screen in the diagnostic menu to see the measured solenoid
resistance.
TCC On/Off Solenoid circuit shorted
TCC on/off solenoid resistance measured too low during the power-on solenoid check.
The controller will attempt to disable both TCC solenoids until the ignition is turned off.
Refer to the data display screen in the diagnostic menu to see the measured solenoid
resistance.
TCC PWM Solenoid circuit shorted
TCC pressure solenoid resistance measured too low during the power-on solenoid check.
The controller will attempt to disable both TCC solenoids until the ignition is turned off.
Refer to the data display screen in the diagnostic menu to see the measured solenoid
resistance.
