14
6.2.
PREPARING FOR
SESSION
1) Before use ensure to clean
your skin with a damp cloth and
soapy water. Leaving your
forehead slightly damp may
allow for better adhesion and
stimulation from the device.
Note:
Do not use make-up
removal products to clean
your forehead as these
leave a greasy film on the skin.
2) For first use, remove one of the
gel pads from its foil packaging.
3) Remove the yellow plastic
liner from the gel pads and
apply to the rear of the QALM
device.
4) Remove the clear plastic liner
from the rear of the device. Be
careful to ensure the gel pads
remain stuck to the device.
5) Place the clear plastic liner
back in the travel case. The
yellow liner can be disposed of.
6) Place the device in the centre
of your forehead, roughly 1 cm
above the eyebrows.
