![background image](http://html1.mh-extra.com/html/paia/vocal-zapper-6730/vocal-zapper-6730_assembly-and-using-manual_747070002.webp)
021402
2 Vocal Zapper
ASSEMBLING THE VOCAL ZAPPER
Before beginning assembly, go through the manual.
Look at the drawings. Feel the parts. You’re
naturally eager to plunge right in, but take a few
deep breaths first. Check the parts supplied against
the packing list on the last page of this manual.
In some cases, notes packed with the parts will
be used to call your attention to special situations.
These notes may be in the yellow "MISSING PARTS"
postcard.
If parts are missing
please notify PAiA at
p405.340.6300, f340.6378, or [email protected] .
Notice that each step in the manual is marked with
a checkoff box like this:
DESIGNATION VALUE COLOR CODE
( ) R27 100 ohm brown-black-brown
Checking off each step as you do it may seem
silly and ritualistic, but it greatly decreases the
chance of omitting a step and also provides
some gratification and reward as each step is
completed.
Numbered figures are printed in the Illustrations
Supplement that serves as a wrapper for this
manual. Remove the wrapper for easy reference
to the illustrations during assembly.
THE CIRCUIT BOARD
The Vocal Zapper is built on a circuit board with solder
masks and plating to help prevent short circuits.
No special preparation or cleaning is necessary
before assembly. The "top" of the board is the side that
is printed with component designations and parts are
mounted from this side. The "bottom" of the board is
also called the solder side.
TOOLS
You’ll need a minimum of tools to assemble the kit
- a small pair of diagonal wire cutters and pliers,
screwdriver, sharp knife, ruler, soldering iron and solder.