©2020 PACE Inc., Vass, North Carolina,
All Rights Reserved
Page
8
Set-up
1.
Connections –
a. Place the PC next to the machine and connect the provided USB/HDMI cables.
b. Assemble the monitor arm kit onto the right side of the machine, attach monitor
and connect to PC.
c. Set out wireless keyboard and mouse, make sure they are turned on and the
wireless receiver has been plugged into the PC.
d. Plug in the power cords for the PC, Monitor, and the BGA unit.
2.
Accessories –
a. Insert a vacuum pick-
i. Select the smallest vacuum pick that can lift the component. If the
component cannot be reliably picked up, move to a larger vacuum pick.
ii. The vacuum pick will thread into the shaft located between the IR
emitters at the bottom of the heater head assembly. Never use tools to
tighten the vacuum pick as doing so can damage the threads or bend the
pick.
3.
Power on –
a. Make sure everything is connected to an appropriate power source.
b. Turn on circuit breaker on back of the IR machine.
c. Turn on PC and monitor.
d. Turn on the switch at the front right-hand corner of the machine.
e. Once PC has finished booting up and the machine is running, double-click on
the PACE IR software icon.