TO ASSEMBLE:
The crank handle and the pronged attachment are not mounted to the slicer upon shipment and must be attached to prepare the unit for use.
To take apart:
•
Disassemble the pronged attachment and the crank handle by gently turning the crank handle counter-clockwise. You will end up with two pieces: a
pronged attachment, designed to hold one side of the vegetable or fruit, and an L -shaped turning crank handle. The pronged attachment has a threaded
metal pin in the back. (see images 1A and 1B)
•
Insert the pin found on the back of pronged attachment through the opening in the upright part of the sliding plate, with the
prongs facing the blade
plate. (see image 2)
•
Screw the crank handle back onto the pin firmly but gently. (see image 3)
Image 1A
Image 1B
Image 2
Image 3
Instructions
