Operation
This device is not intended to diagnose, treat, cure, or prevent any disease
Performing a Scan
1. To
power on
: press and hold button for 2s until LED turns on
2. Enable
Bluetooth
on your mobile device
3. Use the
Pact App
to connect to your Sense
○
The Status LED will glow white when it is connected
4. Follow the app instructions to prepare your
scanning session
5. Lightly
press
the Pact Sense into the target tissue
○
Follow app guidance for pressure and placement tips
○
Use on soft tissue only
6.
Tap the button
to start the measurement
7. Receive
results
in the app
8.
To power off
: press and hold button for 2s until LED turns off
Impact Biosystems, Inc.
5 Colebrook St. Boston, MA 02127
5
