User’s Manual
54
Highlighting the box beside
Stream Protocol
and pressing the
button allows you to select the protocol for streaming.
Highlighting the box beside
Record Protocol
and pressing the button allows you to select the protocol for recording.
Highlighting the box beside
ONVIF Profile
and pressing the
button allows you to select a preset ONVIF
TM
profile.
Highlighting the
Port Number Setup…
box and pressing the
button allows you to select the HTTP server’s port
number and the RTSP server’s port number.
Highlight
Authentication
and press the
button. An Authentication screen appears, and entering Authentication
information is required to change the device settings.
Highlight
Use Audio Recording
and press the
button to toggle between On and Off. When it is On, the DVR will
record audio from the device when video from the network device is recording.
Highlight the
Device Remote Setup
box and press the button. The
Device Remote Setup
screen appears. See
Appendix – Remote Setup of Network Devices
for details.
NOTE: When the device’s settings have been changed using the tool provided by the device manufacturer, you
might need to register the device to the DVR again for proper operation. Refer to the device manufacturer’s
instructions for proper settings.