INSTALLATION GUIDE
FFHL Series LED Flood
Instructions and specifi cations are subject to change at any time without notice. Copyright© 2021 PacLights All Rights Reserved
Page 4 of 4
Need help? (800) 988 -6386 Email: [email protected] Website: www.PacLights.com
PL_INST_FFHL_v0
FFHL PHOTOCELL CONTROL & SECONDARY SURGE PROTECTOR
FIG. 16
The Junction Box (IP65) is required for the Photcell Control and the
Secondary Surge Protector. Remove the Screws (4) from the Cover
of the Junction Box. Remove the Knockout Plug(s) needed to install
the Photocell Control or Secondary Surge Protector (Fig. 16).
J-BOX
COVER
SCREW
1
JUNCTION
BOX
KNOCKOUT
PLUG
Install the Cable Glands with fastener Nuts where the Knockout
Plug(s) have been removed. Install the Photocell Control with a
Locknut. The Secondary Surge Protector can be placed inside the
J-Box (Fig. 17). All wiring must be installed by a certifi ed electrician
and must be compliant to NEC standards.
PHOTOCELL
CONTROL
2
CABLE
GLANDS
FIG. 17
SURGE
PROTECTOR
NUT
LOCKNUT
