INSTALLATION GUIDE
FFHL Series LED Flood
Instructions and specifi cations are subject to change at any time without notice. Copyright© 2021 PacLights All Rights Reserved
Page 3 of 4
Need help? (800) 988 -6386 Email: [email protected] Website: www.PacLights.com
PL_INST_FFHL_v0
The Arm Mount drilling template is for either a Square or Round
pole (Fig. 10). Drill holes on the Square pole by following the Drilling
Template to mount the FFHL to the desired height (Fig. 11).
2
FIG. 10
The Arm Mount is available for all FFHL fi xtures (Fig. 9). The Arm
Mount can be mounted on either a Square or Round pole.
1
FIG. 9
SIDE PLATE
ARM MOUNT
SCREWS
FFHL ARM MOUNT WITH FLOOD MOUNT
LOCKING PLATE
SQUARE POLE
GASKET
ROUND POLE
GASKET
WASHER
LOCK
WASHER
SCREW
If the FFHL fi xture is being installed to a Square Pole, remove the
Round Pole Gasket (Fig. 12).
3
FIG. 12
FIG. 11
SQUARE
POLE
ROUND POLE
GASKET
ARM MOUNT
FIG. 13
FIG. 15
SCREW
LOCKING
PLATE
MOUNTING
POLE
POWER CABLE
Run the Power Cable through the Pole. Place the Locking Plate and
Gasket inside the Mounting Pole and fasten the FFHL fi xture with
the Arm Mount onto the Pole with the Cap Head Screws (Fig. 15).
For the Round Pole, repeat Steps 2-4, except the remove the Square
Pole Gasket for Step 3. Reinstall the Side Plate (Refer to Fig. 13).
6
FIG. 14
FFHL CABLE
Before installing the Arm Mount remove the Trunnion Mount (Refer
to Fig. 5). Install the Flood Mount and the Fixture Mount (Refer to
Fig. 6). Run the FFHL Cable through the inside the Arm Mount.
Align the hole and teeth from the Arm Mount with the FFHL Fixture
Mount and use the Cap Head Screw to fasten them together at the
desired fi xture tilt angle (Fig. 14). Rotate the FFHL fi xture on the
Flood Mount as needed (Refer to Fig. 4)
5
FFHL FLOOD
MOUNT
SCREW
Remove the Screws (4) and the Side Plate from the Arm Mount
before installing the FFHL fi xture (Fig. 13).
4
ARM MOUNT
ARM MOUNT
FFHL FIXTURE
FIXTURE
MOUNT
