FALC Series LED Area Light
Installation Guide
Need help? Tech help line:
(800) 988-6386
Email:
Website:
www.paclights.com
Copyright © 2020 PacLights
All Rights Reserved
Note: Instructions are subject to change at any time without notice
02-00041-20423
AC-ALC-3M 3-in-1
Universal Mount
(as Trunnion Mount)
AC-ALC-3M 3-in-1
Universal Mount
(as Trunnion Mount)
Adjust the tilt angle on the FALC Fixture to the
desired location. Tighten the Socket Head Screws
with an wrench to keep the fixture in place.
Drill holes on the
Mounting Surface by
following the Drilling
Template to mount the
Trunnion Mount to the
desired height.
If the Power Supply Cable is coming from a Junction Box the
FALC Power Cable must be fed into a Junction Box specific for
outdoor applications. Follow the wiring diagram provided to for
installation. All wiring must be done inside the J-box and must be
fed through a water-proof connector. All wiring must be installed
by a certified electrician and must be compliant to NEC standards.
Page 7 of 7
SIDE PLATE
SIDE
PLATE
GASKET
SCREWS
DRILLING
TEMPLATE
Run Power Supply
Cable through this
slot opening into
the Arm Mount
Ø 0.375” Clearance
holes on pole to align
with Locking Plate
hole locations
5.5”
6.25”
0.75”
0.77”
R.24”
Remove the [4] Flat-Head Machine Screws and the Side Plate before installing
onto the FALC Fixture.
If the Power Supply Cable
is coming from the wall, the Power
Supply Cable will run through the
center of the Trunnion Mount.
Fasten the Trunnion Mount to the
Mounting Surface using the
appropriate mounting Bolts
(not included).
Align the teeth of the FALC Bracket Mount
to the Trunnion Mount. Use a wrench to fasten
the Socket Head Srew to the Trunnion Mount
and the FALC Bracket Mount. You can connect
the FALC Cable to the Power Supply without
using a Junction Box only if used with a weather
proof connector.
Once all wiring is properly installed fasten
the Side Plate and Gasket back to the
Trunnion Mount.
DRILL
HOLES/
SLOT
2
1
3
4
BOLTS
POWER
SUPPLY
CABLE
TRUNNION
MOUNT
MOUNTING
SURFACE
SCREW
TRUNNION
MOUNT
POWER SUPPLY
CABLE
FALC
CABLE
5
6
J-BOX
POWER SUPPLY CABLE
FALC CABLE
7
SCREWS
SIDE PLATE
SIDE
PLATE
GASKET
2
9
“Initial Set-up and Optional Controls”
