Packshot
Start
360
COMPONENT REPLACEMENT
LED LAMP REPLACEMENT 2/2:
07
08
09
Remove the glass turntable
platform if necessary in order to
access their respective LED Lamps.
Disconnect the two wires by
pressing the connector node while
pulling the wire out.
Use needle nose pliers if necessary.
Use a Phillips screwdriver or socket
wrench to remove the screw
holding the LED lamps node on
the LED lamp.
Remove and replace with the new
LED lamp.
Note:
The wires and
LED lamps are marked V+ and V-.
Make sure you plug the V+ wire
into the V+ node, and V-wire to
the V- node on the LED lamp.
10
11
Caution:
Periodically check for
and replace any broken LED
crystals in this system. If one LED
crystal fails, it can cause others in
the same set to
malfunction.
12
