Packshot
Start
360
HARDWARE INSTALLATION
TURNTABLE PLATFORM INSTALLATION 1/2:
01
02
03
Lift to remove the top away from
the studio.
Lift to remove both side walls..
Use the magnetic side cover and
cover the openings, one on each
side of the turntable base
Remove the 2 small white hand
screws from the rear bottom area
of the studio.
Install the rear bottom diusion
plate, attach 2 small white hand
screws.
Note:
Push the rear
bottom plate toward the back wall
as close as possible, do not over
tighten the 2 small white hand
screws or else the acrylic will break.
Remove the tape holding the
driving module.
04
05
06
