CLI
P
ACKET
L
IGHT
N
ETWORKS
PL-1000RO
3.3
I
NSTALLATION AND
C
ONFIGURATION
M
ANUAL
C
ONFIDENTIAL AND
P
ROPRIETARY
I
NFORMATION
.
A
LL RIGHTS RESERVED
.
P
AGE
174
Example:
PL-1000RO>configure>interface>>edfa 1 up
PL-1000RO>configure>interface>>
11.4.3.3
Configure Interface MNG Command
Command:
configure interface mng <n> [up | down]
Description:
This command sets the
Admin Status
of the MNG port to the required value.
If the
Admin Status
is not specified, the administrative status of the MNG
port is displayed.
Example:
PL-1000RO>configure>interface>>mng 1 down
PL-1000RO>configure>interface>>mng 1
Port MNG 1 is DOWN
PL-1000RO>configure>interface>>
11.4.4
IP Setting Commands
The following are the IP Setting commands:
•
Configure Interface Ethernet IP
•
•
Configure Interface Network Mode
11.4.4.1
Configure Interface Ethernet IP Command
Command:
configure interface ethernet ip [<addr> [-n <netmask>] [-g
<gateway>]]
Description:
This command sets the IP parameters of the LAN port.
<addr>
: IP address of the LAN port.
<netmask>
: Subnet mask of the port.
<gateway>
: IP address of the default gateway.
If no parameters are specified, the current IP parameter values are displayed.
Example:
PL-1000RO>configure>interface>ethernet>>ip 10.0.3.200 –n 255.255.0.0 –g
10.0.44.44
PL-1000RO>configure>interface>ethernet>>ip
Addr is 10.0.3.200, Subnet mask is 255.255.0.0
Gateway is 10.0.44.44
PL-1000RO>configure>interface>ethernet>>