48
Packard Bell oneTwo M3830 / M3831 AIO Computer Service Guide
Removing the Processor
1.
Remove the HSF assembly by following the procedure described on the previous section.
2.
Disengage the load lever from its latch, then rotate the load lever to the open position.
3.
Open the retention plate to expose the socket body.
4.
Gently lift the processor out of its socket.
CAUTION
DO NOT lay the processor on its base to avoid bending or damaging the pins underneath it.
IMPORTANT
When installing a processor:
• Note the golden arrow on the corner to make sure the processor is properly oriented over
the socket.
• Moisten a soft cloth with isopropyl alcohol and clean the processor die to remove any
thermal grease residue. Wipe the die surface several times to make sure that no particles
or dust contaminants are evident. Allow the alcohol to evaporate before continuing. Apply
just enough thermal grease to evenly coat the surface of the processor die.
Summary of Contents for oneTwo M3830
