Packard Bell oneTwo L5860 Service Manual Download

Page: 85 / 137

Packard Bell oneTwo L5860 / L5861 AIO Computer Service Guide

Printer-related Symptoms

Symptom/Error

Action/FRU

Printing failed.

• Ensure the printer driver is properly installed. Refer to the

printer service manual.

• Printer
• Printer cable
• Mainboard.

Printer problems.

• Refer to the service manual for the printer.

Keyboard-related Symptoms

Symptom/Error

Action/FRU

Some or all keys on keyboard do not work.

• Keyboard

Power Supply-related Symptoms

Symptom/Error

Action/FRU

Pressing the power button does not turn off
the system. (Only unplugging the power
cord from electrical outlet can turn off the
system.)

• Ensure the Soft-off by PWR-BTTN in CMOS Setup (under

Power Management) is not set to Instant-off.

• Power switch cable assembly

Pressing the power button does not turn on
the system

• Power switch cable assembly.

Executing software shutdown from
Windows98 Start menu does not turn off the
system. (Only pressing power button can
turn off the system).

• Enter CMOS Setup and load the default settings.
• Reload software from Recovery CD.

No system power, or power supply fan is
not running.

• Power supply
• Mainboard

Summary of Contents for oneTwo L5860










































































































































Search results

Summary of Contents for oneTwo L5860

Reviews:

Related manuals for oneTwo L5860

Brands by name

Popular brands

Packard Bell oneTwo L5860, Service Manual

Search results

Summary of Contents for oneTwo L5860

Reviews:

Related manuals for oneTwo L5860

Brands by name

Popular brands