54
Packard Bell oneTwo L5860 / L5861 AIO Computer Service Guide
Removing the Speakers
1.
Remove the PSU by following the procedure described on page 46.
2.
Remove the touchscreen control board by following the procedure described on page 51.
3.
Remove the Bluetooth module by following the procedure described on page 52.
4.
Remove the screws securing the speakers.
5.
Remove the speakers and set it aside on top of the chassis
Removing the LCD Assembly
1.
Remove the I/O cable plate by following the procedure described on page 28.
2.
Remove the optical drive by following the procedure described on page 29.
3.
Remove the scaler board by following the procedure described on page 32
4.
Remove the USB/audio board by following the procedure described on page 34.
5.
Remove the mainboard by following the procedure described on page 48.
6.
Remove the PSU by following the procedure described on page 46.
Quantity
Color
Torque
Part Number
4
Black
4.5 kgf-cm
86.3AR26.8R0
IMPORTANT
For oneTwo L5861 only
: If the LCD touchscreen panel becomes defective, the LCD panel
with the touchscreen film and the touchscreen control board should be replace. Return all
three components for RMA.
