Communication
GTW/EN
CT/C40
PACiS Gateway
Page 35/64
4.5
Function 01 / 02: Read Coil Status – Read Input Status
The request function 01 or 02 reads the ON / OFF status of digital inputs in the slave. These
status may be any digital points ( physical, automations, system information, grouping, … ).
These two functions are the only way to read digital points with the MODBUS protocol.
Sequence of events, digital flags ( validity, topical, .. ) are not supported.
This is equal using the Read Coil Status request or the Read Input Status request.
Broadcast is not supported.
Addresses in frames may start from 0…65535.
Query:
Slave
Address
Function
Code
= 01
Starting
Address
(H)
Starting
Address
(L)
No. of
Points (H)
No. of
Points (L)
CRC
(L)
CRC
(H)
The query message specifies the starting coil address and the quantity of coils to be read.
Response:
Slave
Address
Function
Code
= 01
Byte
Count
=
<nbytes>
Data Byte
#1
Data Byte
#i
Data Byte
#nbytes
CRC
(L)
CRC
(H)
The coil or status in the response message is packed as one coil per bit of the data field.
Status is indicated as: 1 = ON, 0 = OFF. The less significant bit of the first data byte contains
the coil addressed in the query. The other coils follow toward the high order end of this byte,
and from 'low order to high order' in subsequent bytes, as described in the frame example.
Important notes:
If the returned coil quantity is not a multiple of eight, the remaining bits in the final byte will be
padded with zeros ( toward the high order end of the byte ). The Byte Count Field specifies
the quantity of complete bytes of data.
For easiest understanding between the gateway and the SCADA, it is recommended to read
a number of points which is a multiple of 8.
If the starting address is not a point in configuration, the message will not be accepted, and
an error exception 2 will be returned.
If the starting address is in configuration and if there is some “holes” ( addresses not in
configuration ) theses holes will be padded with 0 ( i.e value OFF ).
Maximum number of points allowed: 2000
4.6
Function 03 / 04: Read Holding Registers / Input Registers
The request function 03 or 04 reads the values of analogue inputs in the slave. These
registers may be any analogue points (physical, automations, and even counters).
These two functions are the only way to read registers points with the MODBUS protocol.
Flags ( validity, topical, .. ) are not supported in the MODBUS protocol base.
This is equal using the Read Holding Registers request or the Read Input Registers request.
Broadcast is not supported.
Addresses in frames may start from 0…65535.
Summary of Contents for GTW/EN T/C40
