Page 4 of 14
MACHINE PREPARATION
1) UNPACKING THE MACHINE
a) Take off the outer packaging.
b) The machine is fastened to
the pallet with wooden
wedges that block the wheels.
Remove wedge and tie down
straps.
c) Pull the machine off the pallet.
2) SQUEEGEE ASSEMBLY
a) Assemble the squeegee as
shown in the figure to the
right. The squeegee lever
should be in its up position.
b) Insert the locking pin into the
squeegee stud bolt to secure
the squeegee in place.
c) Push the squeegee hose over
the squeegee vacuum port.
The hose should be located to
the right of the squeegee lift
cable.
