ADF SERIES™ OPERATION MANUAL
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
ADF Series Power Source Operation Manual
Page 88 of 349
6.4.2
PROGRAM Output Parameters
Figure 6-2: PROGRAM Screen
The two data entry methods described apply to the parameters on the PROGRAM &
MEASUREMENTS screen. This includes those shown in the table below.
PARAMETER
Range
Unit
Description
Frequency
45 - 500
1
Hz
Output frequency
Voltage AC
0 – 300
2
V rms
AC output
Voltage DC
0 – 425
3
V dc
DC output (Option D)
Current limit
0 to Max
A rms
RMS Current Limit
Power limit
0 to Max
W
True Power Limit
kVA limit
0 to Max
VA
Apparent Power Limit
Table 6-2: Available Output Parameters on PROGRAM screen
Note 1:
On ADF Series models with Option F, frequency setting range is 15 -1200 Hz
Note 2:
On ADF Series models with Option V, max voltage setting can be higher than 300V
Note 3:
On ADF Series models with Option D, max voltage setting is 425Vdc
Each screen has up to five soft keys on the right hand side of the display. These may change
as the selected parameter changes. To move between parameter fields in any screen, use
the shuttle knob. To change a parameter, press the shuttle knob and then adjust the value
by turning the shuttle. When done, press the shuttle to exit edit mode.
Summary of Contents for ADF Series
Page 348: ......
