13
7.
DRIVE SYSTEM (TRACTION MODELS)
DRIVING OPERATION
1.
Bail: Squeezing the Bail activates solution flow, the brush motor, and traction drive
2.
Speed Control: Rotate the Speed Control with either thumb
Clockwise = Faster
Counterclockwise = Slower
3.
Reverse Button: Depress Reverse Button and squeeze Bail for reverse operation
8.
SOLUTION DISTRIBUTION
FILLING THE SOLUTION TANK
Use liquid detergent in the concentration and manner specified by the manufacturer for a 22-gallon solution tank. Excess
foam will damage the vacuum motor. In addition to properly-mixed low-foam detergent, use a small amount of de-foaming
liquid in the recovery tank.
Never use pure acids.
NOTE:
The front fill port strainer blocks debris from falling into the tank. Keep the solution tank free from debris to
prevent filter clogs and reduced solution flow
1.
Add water and cleaning agent to either the front or rear fill port. Water temperature should not exceed 120°F
(50°C)
2.
Monitor the solution level through the sight tube and the marks on the tank at the rear of the machine
3.
To drain the tank, slide the solution sight tube off of the upper fitting and lower to a drain or mop sink
FILL PORTS
SOLUTION SIGHT TUBE
RETURN TO
TABLE OF
CONTENTS
