21
4.7.3 SIDE BRUSH REPLACEMENT
Remove the key from the ignition key switch.
Raise the side brush with the brush control lever as described in section 4.7.1.
Remove all the screws that secure the side brush from the top of the center hub (picture 4.7.3 detail 1).
Replace the brush; Follow the instructions in reverse order.
1
Figure 4.7.3
4.7.4 WASTE HOPPER
Remove the key from the ignition key switch.
Release the clamp that holds the recovery tank to the machine (picture 4.7.4 detail 1).
Pull back on the waste hopper tank to separate it from the machine.
The waste hopper has wheels to easily move to empty it (picture 4.7.4 detail 2).
Follow the instructions in reverse order to replace the hopper.
1
2
Figure 4.7.4
