220206-20
SUPER-SD1
17
Super 27 and Pacific Summit
NOTE: Optional ash dump kit should be installed prior to pedestal or leg kit assembly.
Required tools: 1 - Claw hammer, 1 - 3/4" wrench, and 1- 7/16" wrench
Required:
Pedestal Kit
Leg Adapter
1
Pedestal base
1
Ash drawer enclosure
1
Front cover (attached)
1
Front cover (attached)
4
1/2" washers
with
Leg Set
4
Legs
Crate Removal
1)
Carefully remove wood top and supports.
2)
Remove plastic cover.
3)
Using a 7/16" wrench, remove lag bolts that secure stove body to bottom pallet.
4)
Place stove body carefully on its back.
5)
Using a 3/4" wrench, remove 1" x 1/2" bolts and save for later use.
6)
Remove pallet retaining brackets from stove bottom.
Pedestal Kit
1)
With the unit on its back and the removable cover facing up, align the pedestal
mounting holes with the holes on the stove.
2)
Secure in place with 1" x 1/2" bolts previously removed.
3)
Carefully place the unit in the upright position.
Leg Adapter and Leg Kit
1)
With the unit on its back, align the ash drawer enclosure mounting holes (removable
cover facing up) with the holes on the stove.
2)
Position the legs over top of the same holes on the stove.
3)
Secure in place with 1" x 1/2" bolts previously removed.
4)
Carefully place the unit in the upright position.
Pedestal or Legs
Installation Instructions
