23
SPND.BODYB 100610-24
Label
MINIMUM CLEARANCE TO COMBUSTIBLES (MEASURED FROM INSERT BODY)
A)
ADJACENT SIDEWALL
520 MM / 20.5 IN
B)
MANTEL
762 MM / 30 IN
MANTEL WITH SHIELD 533 MM/ 21 IN
C)
TOP FACING
610 MM / 24 IN
D)
SIDE FACING
165 MM / 6.5 IN
INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER’S INSTALLATION AND OPERATING
INSTRUCTIONS / INSTALLEZ ET UTILISEZ SELON LES INTRUCTIONS D'INSTALLATION ET D'OPÉRATION DU FAB-
RICANT. INSTALL AND USE ONLY IN MASONRY OR FACTORY BUILT FIREPLACE. DO NOT REMOVE BRICKS OR
MORTAR FROM MASONRY FIREPLACE.
DATE OF MANUFACTURE
INSTALL ONLY ON A NON-COMBUSTIBLE HEARTH RAISED 50 MM / 2 IN ABOVE AN ADJACENT COMBUSTIBLE
FLOOR. COMBUSTIBLE FLOOR BEYOND HEARTH MUST BE PROTECTED BY NON-COMBUSTIBLE FLOOR
MATERIAL EXTENDING 405 MM/ 16 IN TO THE FIRING SIDE (E) AND 200 MM / 8 IN TO THE OTHER SIDES (F) OF
THE UNIT / LE PLANCHER COMBUSTIBLE DEVANT LE FOYER DOIT ETRE PROTEGE PAR UN MATERIEL A L
EPREUVE DU FEU QUI EXCEDE DE 450MM/16" LE DEVANT DE L APPAREIL (E) ET DE 200MM/8" SUR LES COTES
(F). COMPONENTS REQUIRED FOR INSTALLATION / MATERIEL REQUIS POUR L INSTALLATION : FULL FLUE LINER
/ GAINE EN ACIER INOXYDABLE OR DIRECT FLUE CONNECTION ASSEMBLY. OPTIONAL COMPONENTS: MANTEL
SHIELD(SPND.MSMBKA), 3" VENT OFFSET(SPND.3OFFSETA), FAN KIT, ELECTRICAL RATING 115V, 60HZ, 1.6 AMP.
ROUTE CORD AWAY FROM UNIT. FOR USE WITH SOLID WOOD FUEL ONLY / POUR UTILISATION AVEC COMBUS-
TIBLE AU BOIS SEULEMENT. DO NOT USE GRATE OR ELEVATE FIRE-BUILD WOOD FIRE DIRECTLY ON HEARTH.
OPERATE WITH FEED DOOR CLOSED. REPLACE GLASS ONLY WITH CERAMIC GLASS / REMPLACES LA VITRE
AVEC UNIQUEMENT DE LA VITRE CÉRAMIQUE. INSPECT AND CLEAN CHIMNEY FREQUENTLY. UNDER CERTAIN
CONDITIONS OF USE, CREOSOTE BUILDUP MAY OCCUR RAPIDLY.
MADE IN CANADA
F
M
A
M
J
J
A
S
O
N
D
2009
2010
2011
2012
2013
2014
U.S. ENVIRONMENTAL PROTECTION AGENCY
CERTIFIED TO COMPLY WITH JULY 1990
PARTICULATE EMISSION STANDARDS
J
LISTED FACTORY BUILT FIREPLACE ACCESSORY INSERT
CERTIFIED FOR USE IN CANADA AND U.S.A.
TESTED TO / ÉPROUVÉ SELON:
ULCS628 / UL1482
MODEL / MODÈLE: SUPER INSERT
SERIES / SÉRIE: D
WN# 16407
CLEARANCE TO COMBUSTIBLE
CONSTRUCTION
F
ADJACENT SIDE W
A
LL
270410 5050.74.B
SPND-1
A
B
D
E
C
CAUTION
HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP CHILDREN,
CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN
BURNS. SEE NAMEPLATE AND INSTRUCTIONS.
MANUFACTURED BY:
PACIFIC ENERGY FIREPLACE PRODUCTS LTD.
2975 ALLENBY RD., DUNCAN, BC V9L 6V8
F
The ceritfi cation label is located on the left side casing of the insert.
CERTIFICATION
LABEL
Summary of Contents for SPND.BODYB
Page 21: ...21 SPND BODYB 100610 24 NOTES...
Page 22: ...22 SPND BODYB 100610 24 NOTES...
