8 VISTA
INSERT-D
210513-24
Surround Assembly and Installation
1) Lay part A, B and C face down on a fl at non-marring surface.
Fasten together with 1/4" x 1/2" bolts and nuts provided
through holes at points “D” (Fig. #8 and 9).
2) Lift the surround assembly to the upright position and make
sure the front face is fl at and even at the joints.
3) Engage the bottom of the pre-assembled surround onto
the unit. The surround base is notched to fi t over the cas-
ing fl ange. (see Fig. #10) Pivot surround assembly up into
place and engage slots onto pins in the upper corners of
the casing. (see Fig. #11)
4) Push the entire appliance back until the surround assembly
is in contact with the fi replace.
Fig. # 8
Fig. # 9
Fig. # 10
Part B
Part A
Part C
Part A
D
D
D
1/4" Nuts
Part C
1/4" x 1/2" Long Bolts
Notch in Surround Base
Fig. # 11
ATTACHMENT
PIN
Summary of Contents for PACIFIC VISTA INSERT
Page 18: ...18 VISTA INSERT D 210513 24 ...
