Installation Instructions
Figure 4: Slide panel in to place.
Side Panel Installation
1. Carefully remove the panels from the box.
2. Loosen the panel bracket screws a little so that the bracket can move while fitting the panel into place.
3. Engage the tabs of the panel into the slots in the front mounting bracket (Figure 4).
4. Attach the panel to the panel bracket. Panel edge fits over top of the panel bracket (Figure 5).
5. Insert two screws into the back of the panel but do not tighten.
6. Push panel from the front toward the rear so that there is no play between the panel tabs and the front
mounting bracket. Also align the bottom of the panel so that it aligns evenly with the base of the unit
(Figure 6).
7. Tighten screws.
Tab
Tab
Tab
Tab
Panel Bracket
Figure 3: Panel bracket.
Figure 5: Panel adjustmentsi
Align panel with unit base
Figure 6: Base of panel and alignment.
13
290816-24_ NEO 1.2
5055.600-A
