26
5055.MR30-A
180516-36
Optional Media
1. Position rear log #1 at the back of the firebox
(Figure 45).
2. Interlock right log #2 with rear log (Figure 46).
3. Lean left log #3 against log set (Figure 47).
4. Interlock front log #4 with left log to complete
log set structure (Figure 48).
Note: Do Not Block Pilot With Logs
Log Placement
The Driftwood log-set with pebbles requires that any crushed glass media be removed if it is present. The
pebbles are spread out around the perimeter of the burner basket after which the glowing embers are evenly
spread out inside of the burner basket - (Figure 45). The stove is delivered with two media dividers - a large
one for the Mirage 30 model (Figure 43), and a smaller one for the Mirage 18 model. The divider will be placed
into the center of the burner basket (Figure 44) and is used to separate the pebbles and glowing embers.
Rocks
Embers
Figure 43: Media divider.
Figure 44: Media divider in place.
Figure 45: Log 1.
Figure 46: Log 2.
Figure 47: Log 3.
Figure 48: Log 4.
Note: Keep gap in media
divider (Figure 43) faced to the
rear of the burner basket, next
to the pilot assembly.
Summary of Contents for MIRAGE 30 SERIES A
Page 33: ...33 180516 36 5055 MR30 A ...
Page 34: ...34 5055 MR30 A 180516 36 ...
Page 35: ...35 180516 36 5055 MR30 A ...
