Pacific Bay CASCADIA, Installation Manual

Page: 9 / 31

- 6 -
When first using your Smart Toilet Seat:
•
Insert the power plug into the socket. Your Smart Toilet Seat’s spray nozzle
should extend and retract initially as part of the system testing phase.
•
Make sure that the power indicator light is on before testing the product. The
power light will indicate when the power is on, and the toilet won’t respond even
if it’s connected to electricity when the power indicator light is off.
1
Search for any water leaks before using the product
a. Make sure that all water connections are secure
b. Turn on the water valve to confirm that there’s no water leaking
c. Check the main unit of the toilet seat to make sure no water is leaking from
the product
2 Confirm all product features are functional (
Note:
sitting sensor will only work
when the toilet seat is down)
a. Cover the sensor with a wet cloth or sit on the toilet
b. Confirm that deodorizer activates
i. Check that the air blows is blowing out correctly
c. Verify cleaning functions
i. Press the [SPRAY] button checking to make sure the nozzle sprays
water
1. The Smart Toilet Seat needs to wait 1 minute for water spray
function to work upon turning the water on and 4 minutes for
warm water after when the tank is empty
ii. Press the water pressure adjustment button and confirm the water
pressure changes
iii. Press the [STOP] button – sprayer should stop
d. Verify Drying Functions
i. Press the [DRYER] button to make sure warm air blows out
ii. Press the [STOP] button – air should stop
e. Verify that the toilet seat is heating properly
i. It may take about 30 seconds for the toilet seat to heat up fully
f. Make sure the deodorizer stops upon removing wet cloth or standing – it
takes 6 seconds for the deodorizer to deactivate
g. The seat cover then can be closed softly by hand before leaving
CLEANING THE WATER FILTER