Pacific Antenna Active Antenna, Manual, Page: 3 / 9

Parts
Use the photograph to help identify parts in your kit. Note that in some cases parts may vary slightly in
appearance from those shown.
Parts Table
Use the first column of the table below to check the parts as you inventory them and use the second column to
check the parts as you install them.
ActiveAntenna20191111
3
Copyright Pacific Antenna 2019
Check Quantity Part Value Description
1 R5 1K 1/4W 5%, BRN-BLK-RED-GLD
1 R2 1.5k 1/4W 5%, BRN-GRN-RED-GLD
1 R6 7.5K 1/4W 5%, VIO-GRN-RED-GLD
2 R3, R4 33K 1/4W 5%, ORG-ORG-ORG-GLD
1 R1 1.5M 1/4W 5%, BRN-GRN-GRN-GLD
1 C1 1000pF Monolythic Capacitor Label 102
1 C2 0.01uF Monolythic Capacitor Label 103
3 C3, C5, C6 0.1uF Monolythic Capacitor Label 104
1 C4 22uF 22uF Electrolytic Capacitor 16V or higher
1 L1 10uH Molded Inductor, BRN-BLK-BLK-SLV
1 Q1 BF256 BF256 JFET in TO-92 package
1 Q2 BC547 BC547 Transistor in TO-92 package
1 LED1 3mm LED Green body 3mm LED
1 BNC Output BNC connector Board mount BNC
1 S1 Push switch 8X8mm Pushbutton_Switch
1 Cover Push switch cover Button cover, color varies
1 J1 Battery Holder 9V Board mount battery holder
4 Feet Rubber feet Rubber feet for PCB
1 PCB Circuit board Amplified Antenna Circuit Board
1 ANT Antenna Telescoping Antenna
1 Nut M3 nut Nut for Antenna
4 4-40 Screws Flathead 4-40x1/4 Flathead steel screw, 4-40x1/4
4 4-40 Nuts 4-40 hex nuts 4-40 steel hex nuts