7
Figure 5
Purse Lock Clip
Shown Closed
Step Four:
(see figure 4)
The grip on the side rail must slide inside the control panel till it can go no more. Install the set screws “K”
#8 x ½”
into the predrilled hole
on the bottom of each side rail as shown in figure 4. You must drive the screw all of the way in.
CAUTION: The treadmill MUST be unplugged.
Step Five:
(see figure 5)
With the handlebar bolted in place, plug the black wire harness (C) into the socket (D) on the power supply board.
Twist open the purse lock clip at (E), insert the wire harness (C), confirm the wire harness is positioned as shown at
point (D) and twist close the purse lock clip. Follow the same procedure for purse lock clip (F).
E
D
C
F
Figure 4
