8
STEP 3
- INSTALL THE FOUR BOLTS (3/8"-16 X 3/4")
AND WASHERS (3/8" SAE) AT POINTS "D", THEN
INSTALL THE OTHER FOUR BOLTS (3/8"-16 X 3/4")
AND WASHERS ( 3/8" SAE) AT POINTS "E".
TIGHTEN BOLTS "D", THEN TIGHTEN
BOLTS "E".
STEP 4
– PLACE THE CONTROL PANEL SUPPORT
TUBE "F" ON TO BRACKETS, DOUBLE CHECK THAT
THE FOAM BLOCK ON THE WIRE HARNESS IS
SANDWICHED BETWEEN THE PANEL SUPPORT TUBE
"F" AND THE RIGHT UPRIGHT.