d)
RECALL Key
- Allows a stored profile (stored in memory) to be displayed on Digital Readout.
e)
SAVE Key
- Allows a new, user defined profile to be stored in memory.
f)
STEP Key
- Advances the user to the next step in the programming sequence. Also allows the
user to step through all stored profiles.
g)
BACK Key
- Backs the user up to the previous step in the programming sequence. Also allows
the user to step back through profiles stored in memory.
h)
ENTER Key
- Performs storage of profile at the end of the programming sequence.
15.
MODE/ESC KEY
- Steps through the modes of operation and is used as an escape key when
editing process control profiles.
16.
DIGITAL READOUT
- A 2 line LCD display of system information.
Figure 1.
General Information
5
Summary of Contents for TF 200
Page 2: ...MANUAL NO 5050 0420 REV C i ...
Page 26: ...21 Quick Start ...