Pace TDC770D, Operator'S Manual

Page: 41 / 48

39
SOLVING PROBLEMS (cont.)
Check Suggested solution Further checks, if there is still a problem
Is the picture distorted or
too small?
NO
D
YES
R
Check that the TV Aspect Ratio and TV
Display Capability, as set on your set-top, are
appropriate for your TV (see pages 24 through
27). Change them if necessary.
If your TV is a 16:9 TV, you can use Auto Pillarbox to add
black borders to 4:3 transmissions, so that the picture is
not stretched (see page 28).
If the TV Aspect Ratio and TV Display Capability settings are
correct, try using Zoom to improve the picture (see page
21) or consult the instructions that came with your TV and
try adjusting your TV’s display.
Can you display menus
and guides on the screen?
YES
D
NO
R
If your TV is connected to the VIDEO OUT or
S-VIDEO connectors, then you will see menus
and guides only if the screen resolution 480i
is set to “ YES ” and 480p , 720p and 1080i are
set to “ NO ”.
Change the TV Display Capability resolution settings if
necessary (see page 26).
Is there any sound?
YES
D
NO
R
Check that the audio cables are securely and
correctly connected.
Check that you have not muted the sound on your set-top
and/or TV. Adjust the volume control on your set-top and/or
TV. If you are using a home theater receiver, check it is set
up correctly.
Can you hear stereo
sound?
YES
D
See the next page
NO
R
First check that the program is likely to have
stereo sound (an old movie, for example, may
not be in stereo).
Check the on-screen Setup Menu, Audio
settings (see page 36). The Stereo Output may
be set to “Mono”. Change it to “Stereo”.
If your TV is mono, you will hear stereo sound only if you
have a stereo audio amplifier and speakers or home theater
connected to your stereo VCR or set-top.