35
Corrective Maintenance
LED Display Message Codes
Listed below are message codes which may be shown on the LED Display if a mistake
is made by the operator (e.g., wrong Password entry) or if the system has
malfunctioned.
Table 2. LED Display Message Codes
LED Display
Message
Description
The incorrect Password has been entered. The displayed
message will time out after 6 seconds and revert to normal
operation. Enter the correct Password.
The LED Display is flashing.
No handpiece is connected to the Power Receptacle.
Connect handpiece.
The handpiece heater assembly sensor is open. Refer to
Table 4 to check handpiece.
The LED Display is flashing.
The handpiece heater assembly sensor is shorted. Refer to
Table 4 to check handpiece.
The LED Display is flashing.
The handpiece heater assembly may be defective. Refer to
Table 4 to check handpiece.
Power source malfunction. Call the PACETechnical Support
for assistance.
Tel. 1-888-535-7223 (toll-free), FAX 1-301-483-7030.
