19
NOTE
The microprocessor circuitry within the unit monitors the system to ensure proper
results. If any abnormalities are encountered, the Burn In cycle will be interrupted and
an error message displayed. If this situation should occur, turn the system off and
perform the procedure again. If the cycle is interrupted a second time, refer to Table
IV and check for handpiece malfunction. If a second handpiece is available, perform
the procedure using that handpiece.
8.At the conclusion of the 15 minute time period, power is removed from the
heater. The Display will read “End”. Press and release the Scroll Up Key
(
▲
) to exit Heater Burn In and return the to normal operation.
Set-Up
