13
8. Place handpiece(s) into the Tip & Tool Stand(s).
9. Using Figure 3 as a guide, connect handpiece
connector(s) to the power source Power
Receptacle(s) in the following manner:
a) With the Connector Key end facing the power
source, turn the Locking Ring fully
counterclockwise.
b) Align the Connector Key with the Receptacle
Keyway.
c) Insert the connector into the Power Receptacle.
d) Turn the Locking Ring fully clockwise to lock
in place.
10. To avoid confusion among handpieces on MBT
201A systems, PACE recommends the use of
colored markers (P/N 6993-0136 Cable Marker
Kit) to identify the particular handpiece power
cable and/or air hose. Attach any two like colored
markers, one to each end of the handpiece power
cable or air hose. Select and use a different color
marker for each handpiece.
11. If you have purchased the optional foot pedal,
insert the foot pedal connector plug into the Foot
Pedal Receptacle on the rear panel of the power
source.
12. Plug the prong end of the Power Cord into a
convenient three wire grounded outlet.
13. Place the POWER Switch in the “On” or “1”
position. The system is now ready for operation.
SET-UP
Figure 3. Handpiece Connection
Figure 4. Foot Pedal Connection
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
