-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
▲
I
NSTRUCTION
M
ANUAL
MEGA
-
T400A
Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1
-
520
-
882
-
6598 Fax +1
-
520
-
882
-
6599 email: [email protected] Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
Recirculating tank connections
8
(Installation continued on next page)
Drain into
screen
Pump
External coolant supply:
Attach 3/4
-
inch tube between pump and cutter.
Drain:
1.5
-
inch (38 mm) tube.
Electrical connections:
Connect electrical power cable to source.
NOTE:
Inspect the operating voltage on the name plate.
Electrical connection for
external coolant supply:
Power for recirculation system comes from the
MEGA
-
T400A
,
Recommended Coolant:
To help minimize corrosion apply a coolant with a anti
-
corrosion
additive or an oil emulsion coolant is recommended.
Note:
It is
recommended that the coolant be changed every 50 cuts or once a
week, whichever occurs first.
