10. Remove the output sun gear and thrust washer from
the output planet carrier.
11. Remove the output planet carrier from the drum.
The planet shafts are tapped for ¼-20 in. lifting bolts
for convenience. Lifting hooks may also be fabricat-
ed from steel bar. Refer to "Planet Carrier Service"
for additional information.
12. Lift the cable drum off of the drum bearing support
and end-bracket. Remove the seal and drum bear-
ing as required. Thoroughly clean and inspect the
ring gear, machined into the inside surface of the
drum, for nicks, spalling or excessive wear. Replace
the drum if the gear wear is more than .015 in. (0.4
mm) when compared to an unworn area of the ring
gear.
16
