Pacific Accessory Corporation
Page 6
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Email - [email protected] - Phone: 727-592-5991
Complete Radio Replacement Kit with Integrated Climate
Control Retention for 2010-2015 Chevrolet Camaro
RPK5-GM4102
Rev: R6
Date: 010419
Alpine
JVC
Kenwood
Clarion / Nakamichi
Other
Pioneer
Sony
Fusion
1
2
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
3
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
4
Source
Source
Source
Source
5
Preset -
Track +
Play
Preset -
Preset -
Preset -
Track +
6
Source
Track -
Track +
Search -
Source
Source
Source
Track -
7
Track +
Band/Disc +
Track -
Band
Track +
Track +
Track +
Audio
8
Track -
Preset/Disc -
Disc/FM +
Send/End
Track -
Track -
Track -
Power
9
Power
Select
Disc/AM -
Send
Band
Band
Band
10
Enter/Play
Attenuation
Answer
End
Answer
Phone Menu
Reject Call/Source
(Bluetooth equipped
radios only)
11
Band/Program
Phone Receive
Voice Dial
END
Answer Call
Answer/End Call
12
Receive
Phone Reject
On Hook
PTT
End Call
13
End
Voice Dial
Off Hook
VR
14
VR
Power
Mute (Multimedia
units only)
15
- Advent, Boyo, Dual, Lightning Audio, Jensen, Rockford Fosgate & Visteon
- Jensen & Advent ONLY
Optional Programming Order
Programming the SWC assignments
1. Turn the key to the ignition position.
2. Press and release the programming button on the side of the interface. The SWC LED will turn on solid.
3. Within 7 seconds, press the button that is to be learned on the steering wheel. The SWC LED will turn off when the button is pressed.
At this point you have two options:
A. For short press functionality:
Release the button within 1.5 seconds. The SWC LED will turn back on.
B. For long press functionality:
Hold the button until the SWC LED starts blinking. Release the button and the SWC LED will
go back to solid.
4. If you need to program more buttons, repeat step 3 for each additional audio function on the steering wheel.
5. If you come across a function in the chart that your steering wheel does not have, or you do not want to program, press and release the
program button on the side of the interface to skip that function.
6.
Once programming is completed, wait seven seconds. The SWC LED will flash three times indicating end of programming.
7. Test the interface for proper functionality. Whenever a SWC is pressed the SWC LED on the interface should blink. If any function does not
work, repeat the programming steps.
Optional Steering Wheel Control Programming (cont.)
Sub-Dash Preparation
1
. Locate the radio brain alignment tabs. Each
side needs to be trimmed for clearance of the
new HVAC panel
2
.
Remove the conical portion of the
alignment tab.
3
.
When finished, the tabs should look like
the one below.