Pacific Accessory Corporation
Page 4
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Email - [email protected] - Phone: 727-592-5991
Complete Radio Replacement Kit with Integrated Climate
Control Retention for 2010-2015 Chevrolet Camaro
RPK5-GM4102
Rev: R6
Date: 010419
Interface Wiring Connection Chart
Light Green
Parking Brake Output (-)
Pink
Vehicle Speed Output
Orange / White
Illumination Output (+)
Purple / White
Reverse Output (+)
Blue / White
Amplifier Remote Turn On
Blue
Not Used
Brown Loop
Mute Loop -
See Note
Installation Step 4 on Page 5
Aftermarket Radio Connections
Blue
Power Antenna output from
aftermarket radio
Antenna Adapter
SWC Connector
Blue / Yellow
Kenwood, or Newer JVC
3.5mm Jack
Alpine, JVC, Clarion,
Pioneer, Sony, Boyo,
Dual, Lightning Audio,
Visteon, Jensen or Advent
Red
AUX Audio Retention Right
White
AUX Audio Retention Left
RCA Connectors
(Main Connector)
RCA Connector
(Grey connector)
Yellow
Reverse Camera
3.5
mm
Connector
(Black connector)
Yellow *
+12v from RP5
DO NOT USE
Yellow *
+12v from vehicle
Black **
Ground from RP5
DO NOT USE
Black **
Ground from vehicle
Red
Accessory. Output
White
Front Left + input
White / Black
Front Left - input
Grey
Front Right + input
Grey / Black
Front Right - input
Green
Rear Left + input
Green / Black
Rear Left - input
Purple
Rear Right + input
Purple / Black
Rear Right - input
3.5mm Jack
AUX retention for 2010-
2012 vehicles equipped
with a factory USB port.
Interface Illustration / Schematic
SWC Connection
See above chart for
different radio type
connections
x3
AUX A
UDIO
CA
MER
A
Aftermarket
Radio
Connections
Vehicle
Connections
SWC Connection
Wiring
Pacific Accessory Corporation
Interface Installation Steps
1
2 3 4 5
6 7
8 9
0
Other =
Advent, BOYO, Dual, Jensen, Lightning Audio, Rockford Fosgate & Visteon
SET RADIO SELECT SWITCH
Alpine
JVC
Kenwood
Clarion /
Nakamichi
Pioneer/Other
Sony
Fusion
1
2
3
4
7
8
9
1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the interface
into the vehicle.
2. Make all connections as described in the chart above.
3. Plug the CMX chime module in if necessary (If the vehicle chimes when the radio is removed, the CMX is not necessary).
PLEASE NOTE:
In order to get the best possible sound out of the CMX please mount it in a place free and clear of any obstructions, preferably
as close as possible to the bottom of the dash pointing down toward the floor of the vehicle.