PAC BCI-CH41, Manual, Page: 6 / 6

PAC
®
| Ph. 866-931-8021 | support@pac-audio.com
©2016 Pacific Accessory Corporation
www.pac-audio.com
Rev. 082616
Page 6
Reverse Camera Input and Navigation Unlock
Interface for Chrysler / Dodge / Jeep / RAM Vehicles
BCI-CH41 (R.2)
Feature Option Description Notes
Double tap turn signal
This will activate the camera input when you double tap either the
left or right turn signal within 2 seconds.
When turn signal on This will activate the camera input whenever a turn signal is on.
>10 ‐ 40 mph
This will activate the camera input when a turn signal is active and the
vehicle is going more than the designated number.
Manual Only
This will allow you to activate the camera input manually by pressing
the forward arrow button on the SWC.
This feature is not available in the Chrysler 300, Dodge
Challenger, Dodge Charger, 2016 Dodge Durango & 2016
Jeep Cherokee.
MPH >0 & <3 ‐ 7
This will activate the camera input whenever the vehicle is going
more than 0 mph or less than the designated number.
You can also activate the camera input manually by pressing the
forward arrow button on the SWC.
Front Park Assist
This will activate the camera input whenever the front park assist
warning system is activated.
You can also activate the camera input manually by pressing the
forward arrow button on the SWC.
You must trigger the front park assist before this feature
will show up in the menu.
This feature is not available in the Chrysler 300 or Dodge
Charger.
Reverse
This will provide a 12v+ trigger whenever the vehicle is placed in
reverse.
Accessory
This will provide a 12v+ trigger whenever the key is in the accessory
or run position.
Force Camera
This will provide a 12v+ trigger whenever the reverse camera is forced
on using the SWC.
Reverse or Force
Camera
This will provide a 12v+ trigger whenever the vehicle is placed in
reverse or the reverse camera is forced on using the SWC.
This is the default setting for Prog Out 1.
Any Camera
This will provide a 12v+ trigger whenever any camera input is
activated.
Accessory
This will provide a 12v+ trigger whenever the key is in the accessory
or run position.
This is the default setting for Prog Out 2 & 3.
Reverse
This will provide a 12v+ trigger whenever the vehicle is placed in
reverse.
Force Camera
This will provide a 12v+ trigger whenever the reverse camera is forced
on using the SWC.
Reverse or Force
Camera
This will provide a 12v+ trigger whenever the vehicle is placed in
reverse or the reverse camera is forced on using the SWC.
Blind Spot
This will provide a 12v+ trigger whenever the blind spot camera is
activated.
Front Camera
This will provide a 12v+ trigger whenever the front camera is
activated.
Rear Media
This will provide a 12v+ trigger whenevr the radio is placed into rear
media mode.
Rear Media mode must be enabled by turning on
dipswitch 2.
Swap Source and Preset SWC On/Off This will allow you to swap the Source and Preset SWC around.
Vehicle must be equipped with audio SWC on the back of
the steering wheel.
Swap Track and Volume SWC On/Off This will allow you to swap the Track and Volume SWC around.
Vehicle must be equipped with audio SWC on the back of
the steering wheel.
Remote Start Restore Climate On/Off
This will restore the climate controls to the last known setting on
remote start.
Vehicle must be equipped with remote start.
Preset EQ On/Off This will give you 3 user programmable presets for the factory EQ. See page 4 of instruction manual for operation.
Auto Start/Stop Memory On/Off
This will force the vehicle to remember the Auto Start/Stop mode
setting once the vehicles key has been cycled.
Only available in vehicles equipped with Auto Start/Stop
system.
Must turn Auto Start/Stop feature on/off before it will
appear in the BCI menu.
Sport Mode Memory On/Off
This will force the vehicle to remember the Sport mode setting once
the vehicles key has been cycled.
Only available in vehicles equipped with Sport Mode.
Must turn Sport Mode on/off before it will appear in the
BCI menu.
ECO Memory On/Off
This will force the vehicle to remember the ECO mode setting once
the vehicles key has been cycled.
Only available in the 2014 Dodge Durango and Jeep Grand
Cherokee.
Exit & Save Saves settings and exits the menu.
Blind Spot Camera
Front Cam
Prog Out 1
Prog Out 2 & 3
BCI Feature Menu Table