
PAC
®
| Ph. 866-931-8021 | [email protected]
©2016 Pacific Accessory Corporation
www.pac-audio.com
Rev. 082616
Page 5
Reverse Camera Input and Navigation Unlock
Interface for Chrysler / Dodge / Jeep / RAM Vehicles
BCI-CH41
(R.2)
DISCLAIMER: Under no circumstances shall the manufacture or the distributors of the BCI-CH41 be held liable for claims of any loss
or damage, consequential, direct or indirect, arising from the sale, installation, or use of the BCI-CH41. The manufacture and its
distributors will not, nor will they authorize any representative or any other individual, to assume obligation or liability in relation to
the BCI-CH41 other than its replacement.
AGREEMENT: End user agrees to use this product in compliance with the instructions and terms of use above and with all State and
Federal laws. PAC provides instructions and safety warnings with respect to this product and disclaims all liability for any use not in
conformity with those instructions or other misuse of its product. If you do not agree, please discontinue use immediately and return
product to place of purchase. This product is intended for off-road use and passenger use only.
VIDEO OUTPUT
REVERSE CAMERA INPUT
FRONT CAMERA
LEFT CAMERA
RIGHT CAMERA
BCI-CH41-HAR
BCI-CH41
VS41
To Radio
To Vehicle
Harness
BCI-CH41 and VS41 connections overview
Using a VS41 along with the BCI-CH41 will provide 4 camera inputs, with CAN-Bus data controlled switching.
In this configuration, there is no need to manually wire the input triggers on the VS41. Simply connect your camera
leads into the video inputs on the VS41, and connect the 10-pin harness into the Expansion Port on the BCI-CH41.
When the appropriate CAN-Bus signals are detected (ie. reverse, or turn signal) the corresponding camera input will be
automatically selected, and it’s video feed will be routed to the factory radio display.
Data controlled camera
switching cable (10-pin)