background image

2.4  Outside ( CO ) Line Connection Assignment

Format : 

 * 3 ABCDEF # 

                

 ABCDEF = CO line jack need to be connected

Description; 

Assigns which CO line(s) is connected to the system or not.

Example: 

Connect CO lines with jack 1,2,3,4,5.

                 Input format 

* 3 12345 #

 can enable CO line 1,2,3,4,5. 

When extension user make external call it will enter CO line according
 to priority. e.g

the first call will enter line1 priority, meanwhile, the 

 second call will enter line 2 in case it is free. We had better connect CO
 lines used for receive incoming call frequently with after jacks because
 anterior lines are occupied by outgoing calls often.

2.5  Access Outside ( CO ) Line Instruction

Allows make external call by any one of following methods 2.5.1~2.5.3.

2.5.1   Access CO Line by Dial 0 or Tap Hookswitch

Example: 

Extension 808 is at non-direct access mode, he makes external call.           

Operating: 

Lifts extension 808      Press 0(or tap hookswitch)      Input number.

                 
            

   Related setting please refer 

2.5.4

.

   

2.5.2   Access CO Line Directly

Example: 

Extension 808 is at direct access mode, he makes external call.           

Operating: 

Lifts extension 808      Input number will enter free CO line.

                 
            

   Related setting please refer 

2.5.4.

   

2.5.4  Direct / Non-Direct Access CO Line Assignment

Format 1: 

 * 8 ABC N # 

                

ABC = Extension number

                N = 0 = Non-direct access CO line mode 
                N = 1 = Access CO line directly

Format 2: 

 * 8 000 #  ( Disable access CO line directly for all extensions )

Description:

  When N = 0

, extension will be at intercom state as soon as off-hook, 

                       user can input extension number directly to make internal call, but
                       he must dial 0 or tap hookswitch to get external dial tone before input 
                       phone number when he needs to make external call.
                       
                                            
                   

2.5.3  Access Preferred CO Line

Format 1: 

 # M     

( At non-direct access CO line mode)

Format 2: 

 * # M  (

 At direct access CO line mode)

                 M= CO line jack number 

Example: 

Extension 808 is at non-direct access mode, he wants to make external 

                 call via CO line 3.

Operating: 

Lifts extension 808      Input #3      Input phone number.

                 
            

- 5 -

Chapter 2: Programming and Operating

Summary of Contents for TC-2000 A

















Reviews: