ENGLISH
CD/USB/SD/BT player and Tuner with remote control
Page 4
5 - Preparation and installation
5.1 - Checking the contents
The package must contain the following articles:
- The MPU130BTMKII
- An infrared remote control
- The user guide
- A double RCA cable
- An antenna set (AM and FM)
- 1 power cord.
5.2 - Installing the unit
a -
Set up the MPU130BTMKIIMKII over a flat surface
or within racks.
b -
Please make sure the unit is installed in a properly
ventilated place, unexposed to sunlight rays, excessive
temperatures or humidity.
CAUTION:
This device can be safely operated when placed on
a flat surface not exceeding a 15° slope. Using this
player on excessively steep surfaces might result in
the ejection, deterioration or impossibility to read your
disks.
The LCD display was designed to be read easily when
you are in front of the player. Please set up the unit in
order for the display to be clearly visible.
5.3 - Connecting the unit
a - Turn the unit off (unplug it).
b - Connect the RCA cable to one of the inputs of your
mixing desk.
CAUTION:
Please use the cables supplied. Using other types of
cables might cause severe damages to the unit.
Please make sure the device is OFF before connecting
any sources in order to prevent severe damages.
6 - Compatible medias
The MPU130BTMKII is able to read several media
formats:
- MP3
- WMA
- CDA
When using the CDA format, please note that the CD
containing the CDA files cannot use any other kind of
files as CDA files cannot be mixed up with MP3 or WMA
files on the same support.
The MP3-Pro, MP4, Wave (etc.) formats are not suppor-
ted by this system.
Please only use MP3, WMA or CDA files on your disks
as other formats might damage your device.
We strongly recommend to use high-quality medias,
recorded at low speed.
Notes:
• Some CD-R/CD-RW recorded via CD writer might
not be readable for many reasons such as the disk
characteristics, scratches, stains, condensation etc.
• Some disks might also be impossible to read if
recorded via CD writer due to the parameters of the
operating systems. Please make sure to format your
disks correctly before rewriting. For more details,
please read the user guide supplied with your CD
6-1 - Compact disks
writer.
• This device cannot read partially recorded or not
finalised CD-R or CD-RW.
• For more information about handlig CD-R/CD-RW,
please consult the safety precautions supplied with
each disk.
About CD-R/RW
Due to the very particular structure of CD-R/CD-RW
disks, they should not be let in Pause mode at a precise
point, as it may result in difficulties to resume the
playing.
As a result, we strongly recommend you to use archive
desks to save your most important files.
About DualDisc
This product was designed to comply with the music
CD regulations. However, performances and flawless
reading are not guaranteed if you are using non-com-
pliant CDs.
