Detailed Instructions—Page 5
2.1) Theben TR622top2 Bell Timer
The timer controls the BELL sound and the LINE UP MUSIC.
Bell :
Channel 1 controls the BELL. Each bell is programmed as a
PULSE with a normal duration of 10 seconds. Each
programmed time is written in to a day (usually Monday or
Day 1) and then “Copied” and added to Days 2 to 5. Days
6 and 7 (Weekend) are then skipped before the time is
saved into memory and the next time is then programmed.
Music :
Channel 2 controls the LINE UP MUSIC. Each music play is
programmed as a PULSE with a normal duration of 2
minutes. Example : Music starts at 10:58am and 2 minutes
later finishes at 11am. A bell time set for 11am then rings the
bell.
Reset :
It is possible to modify or delete individual times. However
we strongly recommend that for more complex changes
(such as changing a complete recess or lunch start and
finish time which may involve changing up to six or seven
individual events) that you instead perform a FULL RESET
of the timer and reprogram it from scratch. This makes errors far less likely, and errors can some times result
in the bell or music coming on and / or staying on at weird times (such as midnight) resulting in significant
problems.
Lists :
Before programming we strongly recommend you write out
ALL your proposed bell and music times on a
weekly schedule
, even showing times that are the same on each day. This will make programming easier
and reduce the chance of making mistakes.
Each panel below shows a step by step procedure to program, modify, delete or clear bell times.
Text shown in
PURPLE indicates what you will see on the timer display for each step.
To Program a Bell time—Channel C1 :
1.) Press MENU.
2.) Press OK TWICE.
(“SWITCH”)
3.) Press button ONCE
(“PULSE”)
4.) Press OK FOUR times
(“HOUR C1 On 0:00.00”)
5.) Set HOUR, press OK and then set MINUTES.
6.) Press OK 3 TIMES
(“PULSE LENGTH C1On 0:00.01”)
7.) Set how long you want bell to ring (normally 10 seconds)
8.) Press OK ONCE.
(“MONDAY C1On x:xx.xx”)
9.) Use or
⊳
to select first DAY you want bell to ring
10.) Press OK
(“COPY C1On x:xx.xx”)
11.) If you want bell to ring more than 1 day press OK again
12.) Use /
⊳
and OK buttons to select additional days
13.) Press a few more times to get to (“SAVE”)
14.) Press OK to complete—Program is now complete.
15.) Either return to (2) to add more times or press MENU
TWICE to finish programming.
If you make a mistake press “Menu” and restart from (2).
To Program a Music time– Channel C2 :
1.) Press MENU.
2.) Press OK TWICE.
(“Channel C1”)
3.) Press button ONCE
(“PULSE”)
4.) Press “OK” ONCE.
(“Channel C1”
5.) Press button again
(“Channel C2”)
6.) Press OK THREE times.
(“HOUR C2 On 0:00”)
7.) Set START HOUR, press OK and then set MINUTES.
8.) Press OK 2 TIMES
(“PULSE LENGTH C2On 0:00:00”)
9.) Set the number of MINUTES you want the music to run
(usually 2 minutes—
should NOT be more than 3 minutes
)
10.) Press OK TWICE
(“MONDAY C2On x:xx.xx”)
11.) Use or
⊳
to select first DAY you want bell to ring
12.) Press OK
(“COPY C2On x:xx.xx”)
13.) If you want bell to ring more than 1 day press OK again
14.) Use /
⊳
and OK buttons to select additional days
13.) Press a few more times to get to (“SAVE”)
14.) Press OK to complete—Program is now complete.
15.) Either return to (2) to add more times or press MENU
TWICE to finish programming.
Note : Make sure that the music run time does NOT overlap a bell time
otherwise the bell will not ring.
To Check Bell times :
1.) Press MENU, then press OK.
2.) Press button ONCE to Check.
3.) Press OK Once.
3.) Press
button ONCE
(“PULSE”)
4.) Press OK TWICE and first time will be displayed.
5.) Press OK TWICE to see the next time.
6.) Keep stepping through times until all are checked.
7.) Press MENU TWICE when finished to get out.
To Check Music Times :
1.) Press MENU, then press OK.
2.) Press button ONCE to Check.
3.) Press OK Once.
4.) Press
button ONCE
(“PULSE”)
5.) Press OK once.
(“Channel C1”)
6.) Press button ONCE
(“Channel C2”)
7.) Press OK and first START time will be displayed.
8.) Keep stepping through times until all are checked.
9.) Press MENU 3 times when finished to get out.