Display Panel :
Installation:
$
CO
2
Meter
ON/OFF key with LED indicator
Cost mode icon
And unit ($)
CO
2
mode icon
Save mode icon
Elapsed time icon
Setting adjustment
Increase button
indicator
Setting adjustment
decrease button
indicator
CO
2
button
Cost button
Meter button
Unit for CO
2
mode (Lb & Kg)
Unit for Watts mode (W)
Year, Month and Day icon
Meter unit icon.
Standby Killer icon:
Standby : enabled
Flash: power off
PIR Motion icon:
Steady: No motion
Flash: Motion detected
ON, OFF and PIR detect function :
1. Pressing the ON/OFF key will turn off power to the outlet at once. The key will illuminate
in red. The unit will continue to measure power (e.g. Voltage, Time) and the function
keys and LCD display will continue to operate.
2. Pressing the ON/OFF key again will turn power on to outlet at once. The key will
illuminate in green. The unit features a spike-free switch function which activates at
zero-crossing and will present clean power to your connected appliance. The unit will
measure power and the function keys and LCD display will operate. The unit will be in
PIR motion detection mode.
3. If there is no motion in the PIR effective area, and the appliance is in standby mode,
the unit will cut off power according to off power delay time setting. For example, with
a 30 minute setting, after 30 minutes, the unit will shut down power, the LED will flash
green every 3 seconds, and the unit will be in PIR motion detection mode. When
somebody moves into the effective PIR area, the unit will turn power on to outlet at
once. The LED will illuminate in green.
3.1 There are 3 conditions that must be true to cut off power:
A, No motion in the PIR effective area,
B, The appliance is in standby condition, and the unit standby off power level is
larger than appliance instant standby power,
C, The off power delayed time setting value must have elapsed.
3.2 Please refer to
Standby power
,
Off power delayed time
and
PIR sensor detecting
distance settings
for detailed information.
4. The shorter the off power delayed time setting, the more energy will be saved but the
AC power on/off cycles will occur more frequently. The appropriate setting for off power
delayed time will be to balance appliance use and save energy. 1 hour for office, 30
minutes for home, is a suggested starting point.
5. Summary:
Remark :
Flashing segments on the LCD display indicate that this item can be re-set.
Page 3
Page 4
1. Before connection to the unit, turn off the appliance and remove the power cord from
the outlet.
2. Plug the appliance’s power cord into the Kill A Watt
®
Edge unit socket, and then connect
the Kill A Watt
®
Edge into the outlet.
3. If there are many appliances, please use a power strip, plug all the appliance’s power
cords into power strip’s sockets and plug the power strip into Kill A Watt
®
Edge socket,
and then connect the Kill A Watt
®
Edge into the outlet.
4. Turn on the appliance within 10 seconds. This time limit is important to ensure correct
standby power detection.
5. Now the Kill A Watt
®
Edge will measure appliance standby power, the ON/OFF key
on the top of the Kill A Watt
®
Edge will flash in green once per second, which indicates
the standby power is being measured. After 30 to 40 seconds, the standby power
measuring is finished. The ON/OFF key’s light will be solid green. Now, the unit is
working and in PIR motion detection mode.
4.1 green light = power on, and PIR motion detect function on.
4.2 red light = power off, and PIR motion detect function off.
4.3 green light every 3 second = power off, and PIR motion detect function on.
4.4 green light every second = standby power is measuring, don’t touch.
