P3 International M375C, Service Manual

Page: 27 / 82

Disassembly
Removing the Hard Disk Drive and Wireless LAN 2 - 7
2.Disassembly
5. Carefully disconnect the Wireless LAN antenna cable , and slide the hard disk assembly in the direction of the
arrow
(
Figure 3a ).
6. Carefully lift the hard disk assembly up out off the computer (the cables
&
will be released as you lift out the
hard disk and Mini-PCI board).
7. Remove screws - in order to separate the Mini-PCI board from the hard disk ( Figure 3c ).
8. Pull the release latches on the side of the Wireless LAN module as indicated by the arrow ( Figure 3e ).
9. The Wireless LAN module will pop-up, and you can remove it ( Figure 3f ).
10. Reverse the process to install a new hard disk (pay careful attention to the orientation of the disk in the case) or
replace the Wireless LAN module.
1
2
3 4
5 8 10 9
11 11
13
4
b.
a.
9
3
1
2
d.
c.
7
11
e.
f.
6
5
8
13
10
11
12
Figure 3
HDD Assembly &
Wireless LAN
Removal (Cont.)
a. Disconnect antenna ca-
ble and slide out the HDD
assembly.
b. Lift the HDD assembly
out of the bay.
c. Remove the screws.
d. Separate the Mini PCI
board and HDD.
e. Pull the release latches.
f. Remove the Wireless
LAN module from the
Mini PCI board.
9. Hard Disk
10. Mini PCI Board
13. Wireless LAN Mod-
ule
• 4 Screws